HQPlayer Desktop is a high performance media player to be able to upsample music file on Windows, mac and Linux OS. HQPlayer NAA is working like a bridge to connect HQplayer Desktop over network to plays music files bridge between HQPlayer Desktop and the device via local network. Especially, NAA is a superb for DSD playback.
You can change the device name.
This screen shot is from HQPlayer Desktop settings menu.
simple demo video
HQPlayer Embedded is supported only on sMS-500, sMS-1000SQ, and sMS-2000.
Enter the device's IP address in the address bar of your web browser to access the Eunhasu Web GUI.
On the [HQPlayer config] page, click [Save changes] to save the settings and start HQPlayer.
When HQPlayer is running, “Active” is displayed below the icon.
Click the [Open HQplayer Embedded] button to go to the HQPlayer Embedded web configuration page. (You can also enter http://[device IP]:8088 in the address bar of your web browser.)
This is the HQPlayer Embedded web configuration page. If a login window appears, enter the default ID/PW: hqplayer/hqplayer.
On the [Key] tab, click [Choose File], select your purchased hqplayerd.key file, and click [Upload]. To apply the full license, reboot the device or restart HQPlayer.
On the [Configuration] tab, select the output method in [Backend]. Select ALSA if a USB DAC is connected directly to the device, or Network Audio if you are outputting to an HQPlayer NAA device. Select the [Device] in the corresponding backend section, then click [Apply].
Last Updated: 2026/11/09 08:43